Telephone

LCD splicing screen is a widely used terminal display equipment in all walks of life. It is favored by users for its high brightness, high resolution, high gamut display function and excellent parameter performance. However, LCD splicing screen is also attributed to Modern Intelligent Quotient display equipment. If you want to use it for a long time, you should pay attention to what matters of LCD splicing screen. LCD splicing screen is a widely used terminal display equipment in all walks of life. It is favored by users for its high brightness, high resolution, high gamut display function and excellent parameter performance. However, LCD splicing screen is also attributed to Modern Intelligent Quotient display equipment. How to use it for a long time? What matters should be paid attention to in LCD splicing screen?

1. Notices about Installation Environment

If the LCD splicing screen runs in a humid environment, once the humidity enters the LCD splicing screen, and if the LCD splicing screen is electrified without removing the humidity, the wet environment will cause circuit oxidation and short circuit, and lead to corrosion of the LCD electrodes, which will lead to damage. Therefore, before we prepare to install and use, we must do a good job of dehumidification in the room, and try to adhere to the boring operation environment. When water vapor is found on the surface of the screen, it is necessary to wipe it quietly with soft cloth and then open the screen. But if moisture is found to have entered the LCD splicing screen, it is necessary to ask the manufacturer to protect it.

2. Notes on LCD splicing screen switch

In the process of operation, try not to switch LCD splicing screen frequently, because in the process of switching, the simple loss is backlight, the service life of backlight lamp is closely related to the switching times of LCD splicing screen, because when starting LCD splicing screen, the cathode electronic material of preheating and high-voltage pulse type will be increased, thus shortening the service life of backlight lamp, which is equivalent to saying if If you turn on the LCD splicing screen four times a day, the life of the backlight will be cut in half.

3. Notes on Cleaning LCD Splicing Screen

When LCD splicing screen is used for a long time, some dust and dirt will inevitably occur, but we must pay attention to the method when we are clean! When we are clean, don't use clean water to clean, because this kind of cleaning method not only can't achieve good cleaning effect, but also simply leave water stains. If the cleaning process is inappropriate, it will simply cause water to penetrate into the LCD splicing screen and damage the LCD splicing screen. So its correct cleaning method is to use soft, non-fibre raw materials such as degreased cotton, lens paper and other soft cloth materials to dip in a small amount of special glass detergent, quietly erase the dust and dirt on the screen. However, if the water droplets are carelessly infiltrated into the LCD spliced screen during the cleaning process, the water should be evaporated and used for electricity.

4. Matters needing attention in the application process

With the arrival of hot summer, many users will open the back cover of LCD splicing screen in order to facilitate the cooling of LCD splicing screen, but this method is extremely risky! Because if it is turned on when it is live, even after power failure, the instantaneous voltage retained by it is extremely high. The transformer in its background lighting construction has about 1000V voltage foot, which is very simple to cause damage to the operator.